Commercial Solar Battery Storage:
PE-Sealed BESS Design and Installation Process

A delayed BESS project usually traces back to design, not equipment.

Barun Corp produces the PE-sealed structural and electrical planset used in the process below. Barun’s BESS scope is behind-the-meter commercial and industrial projects, typically 500 kWh to 10 MWh, outdoor packaged and UL 9540 listed.

What Is the Commercial Battery Storage Installation Process?

Site and system assessment

Existing electrical infrastructure, proposed battery location, and co-located solar details are reviewed before design starts.

Electrical capacity review

Barun checks whether the site's existing service and distribution can carry the proposed battery load on paper. Net energy metering is factored in when it affects the design.

Structural and electrical design

Structural design per ASCE 7-22 and ACI 318. Electrical design per NEC 705 and 706, including short circuit studies.

Planset development

Site plan, equipment layout, and PE-sealed structural and electrical sheets in the contracted scope.

AHJ submittal and utility interconnection

The client or EPC files the permit and interconnection application. AHJ and utility review commonly range from roughly one to three months.

Field installation

The contractor installs the battery system, handles wiring, and commissions from the PE-sealed design. Barun does not perform this work.

What Does Barun Deliver vs.
What Stays with the Client or Contractor?

Scope Item Who Handles It
Structural and electrical design, PE-sealed Barun
SLD and site plan for interconnection Barun
Physical installation, wiring, commissioning Contractor
Fire code documentation (NFPA 855) Fire protection consultant
Permit and interconnection application filing Client or EPC
Battery equipment selection and sale Client or equipment vendor
Incentive, rebate, and tax credit filings Client's tax or financial advisor
Project Example

Project Example — Ground-Mounted Commercial BESS, Alabama

Ground-mounted commercial BESS, 8.155 MWh at medium voltage from 35 Kowint KS-233A batteries (233 kWh each) on 7 KS-233CG combiners. Co-located with an existing 1.3 MW solar array on the same site, tying into the 12 kV grid through a new 2,500 kVA transformer and 4,000A switchgear. Risk Category II, designed to 2018 IBC, 2021 IFC, and NEC 2017 Article 706.

Structural scope: seven 7' × 32' concrete pads with gravel aisles, approximately 107' × 32' overall, equipment anchored with Hilti Kwik Bolt TZ2 anchors.

A commercial BESS design starts with the site’s actual electrical and structural conditions, not a product spec sheet. Incomplete data is what drives design revisions later in the process.

Send a site plan with the proposed battery location, existing electrical infrastructure data, co-located solar system details if applicable, and any known AHJ or fire code requirements.

Contact our engineering team for a quote on commercial battery storage design and PE-sealed plansets.

What Site Data Does Barun Need to Start a BESS Design?

Commercial Battery Storage
Frequently Asked Questions

01

Does Barun install commercial battery storage systems?

No. Barun’s deliverable is the PE-sealed structural and electrical planset, the drawing set the AHJ and utility review. Physical installation, wiring runs, and equipment commissioning are performed by the installer or electrical contractor named in the client’s project team. Barun does not act as that contractor and is not on site for the field work.

02

Does Barun handle NFPA 855 fire code compliance?

No. NFPA 855 governs fire protection for stationary battery storage and is a separate discipline from structural and electrical engineering. That documentation, including spacing, suppression, and ventilation requirements, is prepared by a fire protection consultant. Barun’s PE-sealed drawings cover the structural design of the battery enclosure and pad, and the electrical design of the system, not the fire code package. In jurisdictions like the City of Los Angeles, where BESS installations face a dedicated NFPA 855 plan check, the fire consultant’s package is submitted separately from Barun’s structural and electrical sheets.

03

Can battery storage be added to an existing solar system?

Yes, when that scope is in the engagement. Barun reviews the existing solar system’s structural and electrical documentation, then designs how the battery system integrates: structural coordination for shared mounting or adjacent equipment, and electrical coordination for how the battery ties into the existing single-line diagram.

04

Who files the permit and interconnection application?

The client or its EPC files both. Barun’s role ends at the PE-sealed planset. Barun does not submit paperwork to the AHJ or the utility on the client’s behalf, and does not track the application through the review process beyond providing the sealed documents needed for submittal.

05

How long does AHJ review take for a commercial BESS project?

AHJ and utility review commonly range from roughly one to three months, separate from Barun’s design time. Design time itself depends on intake completeness. Incomplete panel data, missing site plans, or unclear fire code requirements at the outset typically add revision cycles rather than shortening the timeline.

06

How long do commercial battery storage systems last?

Battery lifespan varies by chemistry, duty cycle, and manufacturer, and is a factor Barun accounts for in the structural and electrical design assumptions, particularly enclosure and connection specifications intended to remain in service for the system’s operating life. Barun does not select battery equipment and defers manufacturer-specific lifespan claims to the equipment vendor.

07

Does Barun handle incentives or tax credits for battery storage?

No. Incentive programs, rebates, and tax credit filings, including anything tied to the federal Investment Tax Credit or state-level storage incentives, are handled by the owner’s tax or financial advisor. Barun’s PE-sealed drawings can be referenced as supporting documentation in those filings, but Barun does not prepare, submit, or advise on the incentive paperwork itself.