Talk To An Engineer

Solar Permit Design:
PE Stamped Plan Sets Built for AHJ Compliance

A delayed permit costs money — resubmissions mean schedule slippage, carrying costs, and sometimes a lost interconnection queue position. The difference is almost always the engineering behind the plan set.

Barun Corp’s PE stamped plansets satisfy the AHJ, the utility, and the NEC simultaneously — compliant, cost-effective, and ready for building department approval.

Talk To An Engineer

What Goes Into a Solar Planset

A code-compliant solar planset includes several distinct engineering deliverables, each with its own technical requirements:

Structural Engineering PE Stamps

Site plan and rooftop layout

Array placement and equipment locations drawn to scale for AHJ submission.

  • Setbacks per International Fire Code
  • Roof access pathways documented
  • Every component accurately positioned and dimensioned

Structural analysis

Roof load calculations stamped by a licensed structural PE.

  • Wind and snow loads per ASCE 7
  • Attachment spacing and dead load verification
  • Foundation design for ground mounts and carports

Single-line diagrams (SLD) and three-line diagrams

Electrical schematic built to NEC Article 690 requirements.

  • Rapid shutdown compliance per 690.12
  • Conductor sizing per 690.8
  • Grounding per 690.43, labeling per 690.56(C)

Load calculations

Service entrance capacity and interconnection limits verified.

  • Busbar ratings confirmed
  • Load side interconnection limits per NEC 705.12
  • Errors here are among the most common AHJ correction triggers

Labels, components, and spec sheets

Warning labels and component documentation per the NEC edition adopted by the jurisdiction.

  • Labels at disconnect, rapid shutdown initiation point, and meter
  • Every component listed with accurate manufacturer spec sheets
  • Missing or mismatched specs are a routine correction item

Battery storage integration

Additional scope required for solar plus storage projects.

  • ESS placement documentation
  • NFPA 855 fire code compliance
  • NEC Article 706 requirements
Residential vs. Commercial

Residential vs. Commercial Solar Permit Design

Residential solar

Residential solar permit packages are high volume and process-driven. The structural analysis is typically a roof load letter, the SLD follows a standardized format, and most AHJs work from a checklist. Speed and accuracy matter most. Barun delivers standard residential solar permit packages within 24 hours. Design and engineering packages within 48 hours.
24 hrs
Standard residential solar permit packages
48 hrs
Design and engineering packages
Residential Solar Design

Commercial solar

Commercial solar permit design is a different scope entirely. Systems above 100 kW typically require a full engineering package — stamped structural drawings, plus protection coordination analysis and arc flash documentation where required by the AHJ or utility, and in some cases a medium voltage design deliverable if the solar system interconnects above the service entrance. Multi-tenant buildings, carport structures, and ground-mounted arrays each introduce structural complexity that a residential permit template cannot address.
100 kW+
Full engineering package threshold
MV
Medium voltage design where required
Commercial Solar Design

Barun Corp handles both residential and commercial solar across all 50 states with the full in-house structural and electrical engineering services required for complex C&I projects.

Multi-State AHJ Realities

No two AHJs interpret local codes the same way.

01

California

Enforces Title 24 on top of NEC Article 690.

02

Miami-Dade

Applies wind load requirements exceeding standard ASCE 7-22 assumptions

03

Illinois

Projects under CEJA require additional interconnection documentation

04

New Jersey

NJBPU has specific plan set requirements for TREC-eligible projects

Project Example
DJI_0024

Prince William County, VA

Commercial rooftop project, multiple structural review cycles required:

  • Concentrated load analysis
  • Glue-laminated timber arch calculations
  • Lateral-force-resisting system analysis
  • Signed responsibility letter from the engineer of record
50
States licensed
PR
Plus Puerto Rico
20+
Years engineering
Barun Corp provides solar permit design and engineering across all 50 states. We do not use template solar plans. Every planset is engineered to the jurisdiction’s specific code requirements, from Title 24 markets to hurricane-zone wind load standards, because compliance with local building codes is an engineering decision.
Talk To An Engineer
map

How Barun's Solar Permit Design Process Works

Every project begins with a thorough intake process. We collect and verify all project information before design begins: site details, utility information, AHJ requirements, system size, roof or ground-mount configuration, site photos, electrical data, and equipment preferences. A complete intake reduces permit revisions and approval delays by ensuring the engineering design aligns with utility and building department requirements from the start.

01

PV Design

Full system layout and planset development: module placement, stringing, inverter selection, code-compliant drawings, equipment schedules, and permit-ready documentation. This stage includes single-line diagrams, load calculations, overcurrent protection sizing, and compliance with the NEC edition adopted by the jurisdiction — engineered specifically for the project’s AHJ and utility, not adapted from a generic template.

02

QA/QC

Before engineering review or AHJ submission, every planset undergoes a full accuracy and compliance check. Every dimension, code reference, electrical detail, and label is cross-verified across the entire set — catching the small inconsistencies that trigger revisions and resubmittals before they ever reach the building department.
03

Structural & Electrical Review

Where in scope, licensed structural and electrical PEs perform calculations, review the design, and issue PE sealed Structural and Electrical Engineering. Known AHJ interpretation issues are flagged and resolved proactively.
04

Delivery

Permit-ready plansets are delivered in the exact format the AHJ and utility require. Standard residential designs: 24 hours. Full design and engineering scope: 48 hours. Commercial project timelines are confirmed at kickoff, based on system complexity.

Get Your Solar Permit Design Started

If your projects are coming back with corrections, your plansets aren’t engineered — they’re generated. Barun Corp delivers PE-sealed solar plansets built to satisfy AHJ requirements, hold project timelines, and stand up to the specific code interpretations of your jurisdiction. 

Contact our engineering team for a quote on residential solar design or commercial solar engineering services.

Talk To An Engineer